Restaurants and nightlife
Plant rooms, rooftops, floating floors and slabs, theatres, nightlife and gyms: vibration and noise never reach the people inside or the neighbours.
Points on the drawing
Listen to the building
Start the machines and hear what reaches the homes and premises.
Noise reduction
– dB(A)
The bass from the music goes through the floor to the neighbours. On a floating slab it stays in the room.
Best with headphones. Sound synthesised from typical spectra, not a recording.
1Floating floors and slabs
The problem
Gyms, theatres, dance halls, nightclubs or plant rooms: impacts and bass pass to the neighbours through the structure.
What we fit
A concrete slab on isolators, separated from the structural floor: the floor floats and vibration does not get through.
Typical choice
Anti-vibration floating slab1–4.5 Hz
Sandwich vibration mounts2,500–25,000 kg · 10 Hz
Single anti-vibration springs5–730 kg · 3–9 HzThe final choice depends on the load per mount, the speed and the environment. An engineer confirms it with you.
2Suspended ceilings
The problem
False ceilings, ducts and machines hung from the slab pass vibration and noise from one floor to another.
What we fit
Tension isolators that hang the ceiling or the equipment and cut vibration at the anchor point.
Typical choice
The final choice depends on the load per mount, the speed and the environment. An engineer confirms it with you.
23 products
Single anti-vibration springs
- Load
- 5–730 kg
- Nat. freq.
- 3–9 Hz
Rubber buffer
- Load
- 5–14,000 kg
- Nat. freq.
- 2.5–7 Hz
Machine levelling feet
- Load
- 25–7,000 kg
- Nat. freq.
- 15 Hz
FLEXAMOR vibration mounts
- Load
- on request
- Nat. freq.
- on request
Sandwich vibration mounts
- Load
- 2,500–25,000 kg
- Nat. freq.
- 10 Hz
Shock absorber type B
- Load
- 5–420 kg
- Nat. freq.
- 3–5 Hz
Anti-vibration floating slab
- Load
- on request
- Nat. freq.
- 1–4.5 Hz
Cylindrical rubber mounts
- Load
- 1–1,100 kg
- Nat. freq.
- 8 Hz
Stainless axial vibration mounts
- Load
- 70–1,400 kg
- Nat. freq.
- 15–25 Hz
Spring isolator
- Load
- 390–8,760 kg
- Nat. freq.
- 3–9 Hz
Vertical vibration mounts
- Load
- 2.5–35 kg
- Nat. freq.
- 5–8 Hz
Square and oval base vibration mounts
- Load
- 42–5,000 kg
- Nat. freq.
- 15–20 Hz
Cylindrical rubber buffer
- Load
- 2–30,500 kg
- Nat. freq.
- on request
Vibration mounts 954202-954203
- Load
- 50–7,000 kg
- Nat. freq.
- 11–22 Hz
Equal-frequency vibration mount
- Load
- 4–3,125 kg
- Nat. freq.
- 2–8 Hz
Double springs with retention
- Load
- 80–1,460 kg
- Nat. freq.
- 7–9 Hz
Vibration mounts 954412
- Load
- 1,000–3,000 kg
- Nat. freq.
- 15–20 Hz
Axial BF rubber vibration mounts
- Load
- 80–114 kg
- Nat. freq.
- 5 Hz
Axial rubber vibration mounts
- Load
- 40–135 kg
- Nat. freq.
- 5–8 Hz
Container Pad Seismic Vibration Isolator
- Load
- 100–10,000 kg
- Nat. freq.
- 3–9 Hz
Oval base metallic silentblock
- Load
- 20–50 kg
- Nat. freq.
- 40–60 Hz
Vibration mounts 954201
- Load
- 50–900 kg
- Nat. freq.
- 18–25 Hz
Vibration mounts 954416
- Load
- 350–3,000 kg
- Nat. freq.
- 15–25 Hz
By equipment
Pick the machine or equipment you want to isolate and see which mounts are used.
Not sure which mount you need?
Our calculator tells you in 30 seconds.