Machine tools and presses
Machine tools and presses, metallurgy, mining and cement, printing, textiles, paper and food.
Points on the drawing
Start the press
Does the press impact reach the precision machines?
Start the press and compare.
Illustrative simulation, not a measurement.
1Presses
The problem
Every stroke of a press is an impact that passes into the workshop slab. It is felt by the machines next to it, in the offices and sometimes by the neighbours, and it calls for special foundations.
What we fit
Press mounts with springs and a metal cushion that absorb the impact and return the press to its place. No special foundation is needed.
Typical choice
Press machine vibration isolator800–14,000 kg · 10–25 Hz
Vibration mounts 954416350–3,000 kg · 15–25 Hz
Vibration mounts 95420150–900 kg · 18–25 Hz
Stainless axial vibration mounts70–1,400 kg · 15–25 HzThe final choice depends on the load per mount, the speed and the environment. An engineer confirms it with you.
2Machine tools and machining centres
The problem
A lathe or machining centre needs to be level and stable: if it picks up the shocks from the presses next to it, parts come out of tolerance.
What we fit
Anti-vibration levelling feet, which level and isolate at the same time, or all-metal isolators under the base.
Typical choice
Machine levelling feet25–7,000 kg · 15 HzVibration mounts 954416350–3,000 kg · 15–25 Hz
Vibration mounts S40230–700 kg · 15–20 Hz
Vibration mounts S120 — S125120–7,000 kg · 13–20 HzThe final choice depends on the load per mount, the speed and the environment. An engineer confirms it with you.
3Compressor
The problem
The compressed-air compressor runs all day and passes its vibration to the slab and the workshop pipework.
What we fit
Anti-vibration mounts under the compressor, chosen for its weight and speed.
Typical choice
Vibration mounts 954202-95420350–7,000 kg · 11–22 Hz
Square and oval base vibration mounts42–5,000 kg · 15–20 Hz
Equal-frequency vibration mount4–3,125 kg · 2–8 HzThe final choice depends on the load per mount, the speed and the environment. An engineer confirms it with you.
4Metrology room
The problem
Measuring machines work in microns. Press impacts and forklift traffic coming through the floor distort the measurement.
What we fit
A floating slab or low-frequency springs under the measuring machine, separating it from the workshop floor.
Typical choice
Anti-vibration floating slab1–4.5 Hz
Spring isolator390–8,760 kg · 3–9 Hz
Single anti-vibration springs5–730 kg · 3–9 HzThe final choice depends on the load per mount, the speed and the environment. An engineer confirms it with you.
31 products
Anti-vibration metal cushion
- Load
- 0–3,000 kg
- Nat. freq.
- 10–35 Hz
Single anti-vibration springs
- Load
- 5–730 kg
- Nat. freq.
- 3–9 Hz
Rubber buffer
- Load
- 5–14,000 kg
- Nat. freq.
- 2.5–7 Hz
Machine levelling feet
- Load
- 25–7,000 kg
- Nat. freq.
- 15 Hz
Stainless axial vibration mounts
- Load
- 70–1,400 kg
- Nat. freq.
- 15–25 Hz
Spring isolator
- Load
- 390–8,760 kg
- Nat. freq.
- 3–9 Hz
Square and oval base vibration mounts
- Load
- 42–5,000 kg
- Nat. freq.
- 15–20 Hz
Vibration mounts S402
- Load
- 30–700 kg
- Nat. freq.
- 15–20 Hz
Vibration mounts 954202-954203
- Load
- 50–7,000 kg
- Nat. freq.
- 11–22 Hz
FLEXAMOR vibration mounts
- Load
- on request
- Nat. freq.
- on request
Equal-frequency vibration mount
- Load
- 4–3,125 kg
- Nat. freq.
- 2–8 Hz
Vibration mounts S120 — S125
- Load
- 120–7,000 kg
- Nat. freq.
- 13–20 Hz
Double springs with retention
- Load
- 80–1,460 kg
- Nat. freq.
- 7–9 Hz
Vibration mounts 954412
- Load
- 1,000–3,000 kg
- Nat. freq.
- 15–20 Hz
Axial BF rubber vibration mounts
- Load
- 80–114 kg
- Nat. freq.
- 5 Hz
Press machine vibration isolator
- Load
- 800–14,000 kg
- Nat. freq.
- 10–25 Hz
Anti-vibration floating slab
- Load
- on request
- Nat. freq.
- 1–4.5 Hz
Container Pad Seismic Vibration Isolator
- Load
- 100–10,000 kg
- Nat. freq.
- 3–9 Hz
Oval base metallic silentblock
- Load
- 20–50 kg
- Nat. freq.
- 40–60 Hz
Vibration mounts 954201
- Load
- 50–900 kg
- Nat. freq.
- 18–25 Hz
Vibration mounts 954416
- Load
- 350–3,000 kg
- Nat. freq.
- 15–25 Hz
Cylindrical rubber mounts
- Load
- 1–1,100 kg
- Nat. freq.
- 8 Hz
Vertical vibration mounts
- Load
- 2.5–35 kg
- Nat. freq.
- 5–8 Hz
Cylindrical rubber buffer
- Load
- 2–30,500 kg
- Nat. freq.
- on request
Tension-compression vibration mount
- Load
- 10–70 kg
- Nat. freq.
- 15–25 Hz
Sandwich vibration mounts
- Load
- 2,500–25,000 kg
- Nat. freq.
- 10 Hz
Shock absorber type B
- Load
- 5–420 kg
- Nat. freq.
- 3–5 Hz
Conical shock mount 935009
- Load
- on request
- Nat. freq.
- 6–12 Hz
Axial rubber vibration mounts
- Load
- 40–135 kg
- Nat. freq.
- 5–8 Hz
Non-Raised Floor Plinth, seismic plinth for racks
- Load
- 100–1,500 kg
- Nat. freq.
- 4–5 Hz
VIBRALOCK washer
- Load
- on request
- Nat. freq.
- on request
By equipment
Pick the machine or equipment you want to isolate and see which mounts are used.
Not sure which mount you need?
Our calculator tells you in 30 seconds.