Construction and agricultural machinery
Motorsport and extreme-condition vehicles, such as the Dakar, and construction and agricultural machinery.
Machinery lab
Choose a machine and terrain, and see how much vibration reaches the cab
Equipment: 100%
Temperature 20 °CIsolation —
Stage 1 · Track with jumps
Reach the finish without breaking the equipment. Every hard landing damages it.
Equipment mounting
Accelerate: → · Brake: ← · Wheelie and nose up: ↑ · Nose down: ↓
- Time
- Peak impact
- Jumps
- Equipment condition
Where the mounts go
Each pink dot is a mount. Tap a number to see what it protects.
reaches the equipment
—
Optional: a challenge with jumps. Illustrative simulation, not a measurement.
The tablet that did not miss a single stage
- 2nd
- in the Original category
- 8
- stages won in Original
- 19th
- overall in the bike class
- #44
- Husqvarna · Pedregà Team
Silentflex protected the navigation tablet of bike #44 on the 2026 Dakar with all-metal isolators, in the Original category: no outside assistance, the rider looks after the bike alone. Spanish television RTVE showed how the Silentflex mounts were fitted on the bike.
1Cab and driver
The problem
The driver spends whole days on a tractor that vibrates with the engine and every furrow. Vibration tires, harms the back and has legal exposure limits.
What we fit
Mounts under the cab that separate it from the chassis: bell-shaped mounts and metal cushions.
Typical choice
Square and oval base vibration mounts42–5,000 kg · 15–20 Hz
Anti-vibration metal cushion0–3,000 kg · 10–35 Hz
Vibration mounts 954202-95420350–7,000 kg · 11–22 HzThe final choice depends on the load per mount, the speed and the environment. An engineer confirms it with you.
2Engine
Vibration source
The problem
The diesel engine works at full load for hours and passes its vibration to the chassis, the cab and the implements.
What we fit
All-metal engine mounts, resistant to oil, heat and mud.
Typical choice
Vibration mounts 954202-95420350–7,000 kg · 11–22 Hz
Vibration mounts 9544121,000–3,000 kg · 15–20 Hz
Vibration mounts 954416350–3,000 kg · 15–25 HzThe final choice depends on the load per mount, the speed and the environment. An engineer confirms it with you.
3Exhaust
The problem
The vertical exhaust vibrates with the engine, runs hot and takes shocks from the ground.
What we fit
All-metal exhaust mounts, with no rubber to crack in the heat.
Typical choice
Anti-vibration metal cushion0–3,000 kg · 10–35 Hz
S501 exhaust pipe vibration mount20–7,000 kg · 10–25 HzThe final choice depends on the load per mount, the speed and the environment. An engineer confirms it with you.
4Electronics and guidance
The problem
Terminals, guidance GPS and control units suffer from constant vibration and bumps.
What we fit
Wire rope isolators and metal cushions under each unit.
Typical choice
The final choice depends on the load per mount, the speed and the environment. An engineer confirms it with you.
1Cab
The problem
Every time the bucket loads and dumps, a shock reaches the cab, on top of engine vibration.
What we fit
Mounts under the cab that absorb impacts and isolate vibration.
Typical choice
Square and oval base vibration mounts42–5,000 kg · 15–20 HzAnti-vibration metal cushion0–3,000 kg · 10–35 Hz
Vibration mounts S40230–700 kg · 15–20 HzThe final choice depends on the load per mount, the speed and the environment. An engineer confirms it with you.
2Engine
Vibration source
The problem
The rear engine works at full load in dust and mud and makes the whole machine vibrate.
What we fit
All-metal engine mounts that do not age with heat or oil.
Typical choice
Vibration mounts 954202-95420350–7,000 kg · 11–22 HzVibration mounts 954416350–3,000 kg · 15–25 HzVibration mounts 9544121,000–3,000 kg · 15–20 HzThe final choice depends on the load per mount, the speed and the environment. An engineer confirms it with you.
3Exhaust
The problem
The exhaust vibrates with the engine and with the shocks from the bucket.
What we fit
All-metal exhaust mounts.
Typical choice
Anti-vibration metal cushion0–3,000 kg · 10–35 HzS501 exhaust pipe vibration mount20–7,000 kg · 10–25 HzThe final choice depends on the load per mount, the speed and the environment. An engineer confirms it with you.
4Articulation and arms
The problem
The centre articulation and the loader arms work with shocks, mud and sand, and the bushes wear out.
What we fit
Flexible bushes and all-metal flexible bushes that replace greased bushes.
Typical choice
The final choice depends on the load per mount, the speed and the environment. An engineer confirms it with you.
28 products
Anti-vibration metal cushion
- Load
- 0–3,000 kg
- Nat. freq.
- 10–35 Hz
Single anti-vibration springs
- Load
- 5–730 kg
- Nat. freq.
- 3–9 Hz
Elastic joint (silentbloc bush)
- Load
- on request
- Nat. freq.
- 8 Hz
Wire rope isolators
- Load
- 5–1,000 kg
- Nat. freq.
- 7–15 Hz
Rubber buffer
- Load
- 5–14,000 kg
- Nat. freq.
- 2.5–7 Hz
Stainless axial vibration mounts
- Load
- 70–1,400 kg
- Nat. freq.
- 15–25 Hz
Square and oval base vibration mounts
- Load
- 42–5,000 kg
- Nat. freq.
- 15–20 Hz
Vibration mounts S402
- Load
- 30–700 kg
- Nat. freq.
- 15–20 Hz
Vibration mounts 954202-954203
- Load
- 50–7,000 kg
- Nat. freq.
- 11–22 Hz
FLEXAMOR vibration mounts
- Load
- on request
- Nat. freq.
- on request
Equal-frequency vibration mount
- Load
- 4–3,125 kg
- Nat. freq.
- 2–8 Hz
Vibration mounts 954412
- Load
- 1,000–3,000 kg
- Nat. freq.
- 15–20 Hz
Axial BF rubber vibration mounts
- Load
- 80–114 kg
- Nat. freq.
- 5 Hz
All-metal flexible bush
- Load
- 200–1,100 kg
- Nat. freq.
- 25–40 Hz
Oval base metallic silentblock
- Load
- 20–50 kg
- Nat. freq.
- 40–60 Hz
VIBRALOCK washer
- Load
- on request
- Nat. freq.
- on request
Vibration mounts 954201
- Load
- 50–900 kg
- Nat. freq.
- 18–25 Hz
Vibration mounts 954416
- Load
- 350–3,000 kg
- Nat. freq.
- 15–25 Hz
Cylindrical rubber mounts
- Load
- 1–1,100 kg
- Nat. freq.
- 8 Hz
Spring isolator
- Load
- 390–8,760 kg
- Nat. freq.
- 3–9 Hz
Electronics and aeronautics vibration mount 7002
- Load
- 0.7–60 kg
- Nat. freq.
- 6–12 Hz
S501 exhaust pipe vibration mount
- Load
- 20–7,000 kg
- Nat. freq.
- 10–25 Hz
Cylindrical rubber buffer
- Load
- 2–30,500 kg
- Nat. freq.
- on request
Electronics and aeronautics vibration mount 7001
- Load
- 0.3–4.5 kg
- Nat. freq.
- 6–12 Hz
Double springs with retention
- Load
- 80–1,460 kg
- Nat. freq.
- 7–9 Hz
Axial rubber vibration mounts
- Load
- 40–135 kg
- Nat. freq.
- 5–8 Hz
Container Pad Seismic Vibration Isolator
- Load
- 100–10,000 kg
- Nat. freq.
- 3–9 Hz
Vibration mount 1202 / 914
- Load
- 1–60 kg
- Nat. freq.
- 15–25 Hz
By equipment
Pick the machine or equipment you want to isolate and see which mounts are used.
Not sure which mount you need?
Our calculator tells you in 30 seconds.